{"id":13343,"date":"2019-02-13T19:55:20","date_gmt":"2019-02-13T11:55:20","guid":{"rendered":"https:\/\/wp-productionenv-bjg9h2g2bgg5b8aa.southeastasia-01.azurewebsites.net\/news\/cubesat-deployed-from-space-station-to-test-sample-return-technology\/"},"modified":"2019-02-13T19:55:20","modified_gmt":"2019-02-13T11:55:20","slug":"cubesat-deployed-from-space-station-to-test-sample-return-technology","status":"publish","type":"post","link":"https:\/\/starpath.global\/news\/cubesat-deployed-from-space-station-to-test-sample-return-technology\/","title":{"rendered":"CubeSat deployed from space station to test sample return technology"},"content":{"rendered":"
\"\"
Students work with the TechEdSat 8 CubeSat before its launch to the International Space Station. Credit: NASA<\/figcaption><\/figure>\n

One of five CubeSats deployed from the International Space Station last month is testing a steerable drag brake that could find use in future smallsats to return experiment samples to the ground from low Earth orbit, or on low-cost micro-probes to explore other planets.<\/p>\n

NASA\u2019s TechEdSat 8 nanosatellite was one of five CubeSats released from a NanoRacks deployer outside the space station Jan. 31, joining other missions probing the ionosphere, conducting communications experiments, and providing hands-on experience for engineering students.<\/p>\n

Designed and developed by scientists, engineers and students at NASA\u2019s Ames Research Center and San Jose State University, TechEdSat 8 is the latest in a series of miniature satellites validating technology and techniques for returning CubeSats and small sample canisters to Earth intact.<\/p>\n

An Exo-Brake \u2014 a square-shaped sail resembling a parachute that spans nearly a half-meter (20 inches) on a side \u2014 popped out of one end of TechEdSat 8 around 60 seconds after ejecting out of the NanoRacks deployer on the station\u2019s Japanese robotic arm. The sail generates drag on the satellite as it speeds around Earth, using the rarefied atmosphere to slow down and drop altitude from the space station\u2019s orbit more than 250 miles (400 kilometers) above the planet, without needing any propellant.<\/p>\n

Tensioning mechanisms on the TechEdSat 8 spacecraft, which measures around two-and-a-half feet (74 centimeters) long and is composed of six CubeSat \u201cunits,\u201d will modulate the Exo-Brake, changing its surface area in an attempt to control how much drag the device generates. Engineers will use the modulating Exo-Brake to try to target where the spacecraft will re-enter the atmosphere.<\/p>\n

The Exo-Brake is comprised of a lightweight sandwich structure that the TechEdSat team is at Ames is seeking to patent, according to Marcus Murbach, TechEdSat 8\u2019s principal investigator.<\/p>\n

Murbach told Spaceflight Now the TechEdSat 8 spacecraft is performing well in the early weeks of its mission. Ali Guarneros Luna, an aerospace and systems engineer at Ames, said TechEdSat 8 contacted controllers via the Iridium and Globalstar communications networks as planned shortly after its separation from the space station.<\/p>\n

In a response to written questions from Spaceflight Now, Guarneros Luna said the satellite is expected to fall back into the atmosphere in around six weeks, depending on the maneuvers attempted with the Exo-Brake decelerator, and changing solar activity, which can cause the atmosphere to balloon outward, producing more drag for spacecraft in low Earth orbit.<\/p>\n

TechEdSat 8\u2019s predecessors in the TechEdSat series have experimented with increasingly complex maneuvers, and with larger satellites. The first two TechEdSat missions used single-unit, or 1U, CubeSats about the size of a Rubik\u2019s cube to test miniaturized email-based communications technology. Later TechEdSat missions began using larger, shoebox-sized 3U CubeSats in 2013, and introduced the Exo-Brake device.<\/p>\n

\"\"
This photo taken by astronauts on the International Space Station shows the TechEdSat 6 spacecraft with its Exo-Brake structure unfurled soon after deployment in November 2017. Credit: NASA<\/figcaption><\/figure>\n

Murbach said engineers at Ames are still fine-tuning how to maneuver the Exo-Brake and more precisely target where the CubeSats will re-enter the atmosphere.<\/p>\n

\u201cWe are still target-practicing the re-entry point,\u201d Murbach said. \u201cIn a couple flights, we\u2019ll attempt deeper entry and eventual recovery.\u201d<\/p>\n

The TechEdSat satellites deployed from the space station could re-enter the atmosphere anywhere between 51.6 degrees north and south latitude, a geographic area bounded by the station\u2019s orbital inclination.<\/p>\n

\u201cWe typically target Wallops (Island in Virginia), which we did last time, with some success, though it over-shot without the final flare maneuver,\u201d Murbach said.<\/p>\n

Engineers will have to beef up the heat shield on the TechEdSat satellites to achieve a full re-entry and recovery. The team already has developed an ablative nose for the CubeSat, and is working on a higher-temperature material to protect nanosatellites from the heat of re-entry, Murbach said.<\/p>\n

The Exo-Brake technology could be used for \u201con-demand\u201d sample return from the International Space Station and other orbiting laboratories, according to NASA officials. SpaceX\u2019s Dragon cargo capsule and the Russian Soyuz crew ferry ship are currently the only spacecraft in service capable of returning any specimens or hardware intact to Earth\u2019s surface. The SpaceX Crew Dragon and Boeing CST-100 Starliner spacecraft, both designed for astronauts, will also have limited payload return capability when they begin flying later this year.<\/p>\n

But nanosatellites released from the station could return samples more often, at lower cost, and closer to research teams on the ground, reducing the time and effort required to recover the samples.<\/p>\n

\"\"
A CubeSat is released from the NanoRacks deployer outside the International Space Station on Jan. 31. Credit: Oleg Kononenko\/Roscosmos<\/figcaption><\/figure>\n

NASA engineers also hope to apply technologies like the Exo-Brake tested on the TechEdSat missions to interplanetary micro-probes, such as tiny spacecraft that could reach the surface of Mars, enabling new research at the Red Planet at reduced cost.<\/p>\n

TechEdSat 8 also hosts several other experiments, including a radiation-tolerant circuit board and processor, and a plasma physics investigation.<\/p>\n

Several more TechEdSat satellites are in development at Ames, in cooperation with university students. TechEdSat 7, which is smaller than TechEdSat 8, is scheduled to launch on Virgin Orbit\u2019s LauncherOne rocket later this year, and NASA has also selected the TechEdSat 10 mission for a future launch.<\/p>\n

TechEdSat 8 was one of a batch of CubeSats deployed from the space station Jan. 31.<\/p>\n

The UNITE CubeSat, developed by students at the University of Southern Indiana, is part of NASA\u2019s educational nanosatellite program. It carries instrumentation to measure plasma in the upper atmosphere.<\/p>\n

The CubeSat Assessment and Test mission \u2014 using two spacecraft named CAT 1 and CAT 2 \u2014 comes from the Johns Hopkins University Applied Physics Laboratory, with two commercial off-the-shelf spacecraft for a communications experiment in low Earth orbit. The Delphini 1 CubeSat from Aarhus University in Denmark was also released Jan. 31.<\/p>\n

TechEdSat 8, UNITE, CAT 1 and 2, and Delphini 1 were launched inside a SpaceX Dragon resupply ship in December, then mounted inside the NanoRacks deployer and transferred to the Japanese airlock by station astronauts.<\/p>\n

\"\"
The UNITE CubeSat after release from a deployer outside the International Space Station. Credit: NanoRacks<\/figcaption><\/figure>\n

NanoRacks is a Houston-based company that offers launch and deployment services for small satellites. The company said it has deployed 190 CubeSats from the space station \u2014 and 228 small satellites overall \u2014 with the five new CubeSats released into orbit Jan. 31.<\/p>\n

\u201cOnce again we are demonstrating the diverse CubeSat market that exists today\u201d said Henry Martin, external payloads manager at NanoRacks. \u201cNanoRacks satellite deployment platforms enable affordable opportunities for everyone from high school, to the university level, to the professional researchers at the Applied Physics Laboratory. The International Space Station is the perfect testbed for those that are new to space and to those that have a long history in orbit, and having such frequent access and opportunity continues to open the door to a growing space marketplace.\u201d<\/p>\n

Email the author.<\/i><\/b><\/p>\n

Follow Stephen Clark on Twitter: @StephenClark1.<\/strong><\/em><\/p>\n","protected":false},"excerpt":{"rendered":"

Students work with the TechEdSat 8 CubeSat before its launch to the International Space Station. Credit: NASA One of five CubeSats deployed from the International Space Station last month is testing a steerable drag brake that could find use in future smallsats to return experiment samples to the ground from low Earth orbit, or on […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"footnotes":"","_links_to":"","_links_to_target":""},"categories":[2],"tags":[],"class_list":["post-13343","post","type-post","status-publish","format-standard","hentry","category-news"],"acf":[],"_links":{"self":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts\/13343"}],"collection":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/comments?post=13343"}],"version-history":[{"count":0,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts\/13343\/revisions"}],"wp:attachment":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/media?parent=13343"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/categories?post=13343"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/tags?post=13343"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}