{"id":14244,"date":"2017-10-26T01:21:55","date_gmt":"2017-10-25T17:21:55","guid":{"rendered":"https:\/\/wp-productionenv-bjg9h2g2bgg5b8aa.southeastasia-01.azurewebsites.net\/news\/engineers-hopeful-mars-rovers-drill-can-return-to-service\/"},"modified":"2017-10-26T01:21:55","modified_gmt":"2017-10-25T17:21:55","slug":"engineers-hopeful-mars-rovers-drill-can-return-to-service","status":"publish","type":"post","link":"https:\/\/starpath.global\/news\/engineers-hopeful-mars-rovers-drill-can-return-to-service\/","title":{"rendered":"Engineers hopeful Mars rover\u2019s drill can return to service"},"content":{"rendered":"
\"\"
File photo of the Curiosity rover\u2019s turret of tools at the end of its robotic arm, as seen shortly after its landing on Mars in August 2012. Credit: NASA\/JPL-Caltech<\/figcaption><\/figure>\n

Engineers have started testing a new way to use the Curiosity rover\u2019s drill to bore into Martian rocks after a motor in the device stalled late last year, but ground teams are still months away from the first chance to resume drilling operations.<\/p>\n

The rover has not used its drill since Dec. 1, 2016, when engineers noticed a problem with the drill feed mechanism, a motor which is supposed to extend the drill bit to touch the surface of Martian rocks. Two fang-like contact posts on each side of the drill bit press on the rock for stability, then the drill feed motor pushes the bit onto the rock before percussive and rotating mechanisms start boring into the target to collect a powder sample.<\/p>\n

With the drill feed mechanism no longer reliably working, managers have decided to keep the drill bit in its extended position. That raises concerns over the stability of the drill while in use because the prong-like extensions on each side of the bit will no longer be in contact with the rock.<\/p>\n

Curiosity touched its drill bit directly onto a Martian rock Oct. 17, according to a press release from NASA\u2019s Jet Propulsion Laboratory. The rover was commanded to press the drill bit downward, then applied smaller sideways forces, according to a statement.<\/p>\n

A force sensor took measurements during the test. Engineers want to avoid applying too much side force while the drill is in use to ensure the bit does not get stuck in the rock.<\/p>\n

\u201cThis is the first time we\u2019ve ever placed the drill bit directly on a Martian rock without stabilizers,\u201d said JPL\u2019s Douglas Klein, chief engineer for the mission\u2019s return-to-drilling development. \u201cThe test is to gain better understanding of how the force\/torque sensor on the arm provides information about side forces.\u201d<\/p>\n

\"\"
This colorized mosaic of images captured by Curiosity\u2019s navigation cameras Oct. 2 shows the drill bit in its fully extended position pointing upward. Two weeks later, Curiosity touched its drill to Martian rock for the first time since a problem with the device appeared in December 2016. Credit: NASA\/JPL\/Ken Kremer\/Marco Di Lorenzo<\/figcaption><\/figure>\n

The drill is critical for collecting powdered rock samples from Martian rocks. Rock powder excavated by the drill goes into a collection chamber, where the material is sifted and sieved for delivery to miniature laboratory instruments on the rover\u2019s science deck.<\/p>\n

The instruments measure the composition of the rock, helping scientists search for organic compounds and identify which rocks formed in the presence of water.<\/p>\n

Curiosity has drilled into Martian rocks 15 times since landing on the red planet in August 2012, and it used the stabilizing contact posts each time. Assuming engineers see favorable results from the ongoing tests, the rover\u2019s robotic arm will carefully place the drill bit directly on rocks during future drilling operations.<\/p>\n

\u201cWe\u2019re replacing the one-axis motion of the feed mechanism with an arm that has five degrees of freedom of motion,\u201d Klein said in a press release. \u201cThat\u2019s not simple. It\u2019s fortunate the arm has the force\/torque sensor.\u201d<\/p>\n

Engineers working in JPL\u2019s \u201cMars Yard\u201d have used a ground replica of the Curiosity rover to test out the new drilling technique before beginning demonstrations with the robot on Mars. Ground teams also had to develop an alternate way to deliver the powdered samples to Curiosity\u2019s science instruments because the procedure used before required the drill bit to be withdrawn, not extended.<\/p>\n

\u201cThe development work and testing here at JPL has been promising,\u201d said Steve Lee, Curiosity\u2019s deputy project manager at JPL. \u201cThe next step is to assess the force\/torque sensor on Mars. We\u2019ve made tremendous progress in developing feed-extended drilling, using the rover\u2019s versatile capabilities beyond the original design concepts. While there are still uncertainties that may complicate attempts to drill on Mars again, we are optimistic.\u201d<\/p>\n

Ashwin Vasavada, Curiosity\u2019s project scientist, told Spaceflight Now in an email that the leading hypothesis for the source of the drill problem remains foreign object debris inside drill feed mechanism, keeping its brake from fully disengaging. While engineers cannot rule out another cause, such as an electrical issue, the behavior of the drill points to debris as the most likely cause.<\/p>\n

It remains unclear to engineers whether the debris was inside the drill before its launch and carried to Mars, or if contaminants were generated through using the drill after landing.<\/p>\n

An intermittent electrical short in the drill\u2019s percussive mechanism cropped up in early 2015, prompting engineers to rely on the device\u2019s rotating mechanism for some drilling operations. The percussive function is still available, but managers want to avoid using it unless necessary.<\/p>\n

Curiosity is in its second extended mission phase after wrapping up its original two-year primary mission in 2014.<\/p>\n

The rover continued driving to higher elevations on Mount Sharp, a three-mile-high (5-kilometer) peak at the mission\u2019s Gale Crater landing site, while ground teams studied the drill problem over the last 10 months. Observations by the rover\u2019s other scientific instruments, including its rock-zapping laser, brush, weather sensors and cameras, have not been affected by the temporary loss of the drill.<\/p>\n

Curiosity is nearing the top of the 20-story-tall \u201cVera Rubin Ridge\u201d on lower Mount Sharp, NASA said. The rover\u2019s scientific focus there is the study of hematite, an iron-oxide mineral embedded in rocks that likely formed in an ancient watery environment.<\/p>\n

Email the author.<\/i><\/b><\/p>\n

Follow Stephen Clark on Twitter: @StephenClark1.<\/strong><\/em><\/p>\n","protected":false},"excerpt":{"rendered":"

File photo of the Curiosity rover\u2019s turret of tools at the end of its robotic arm, as seen shortly after its landing on Mars in August 2012. Credit: NASA\/JPL-Caltech Engineers have started testing a new way to use the Curiosity rover\u2019s drill to bore into Martian rocks after a motor in the device stalled late […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"footnotes":"","_links_to":"","_links_to_target":""},"categories":[2],"tags":[2927,2942,1183,367,1714,2944,1561],"class_list":["post-14244","post","type-post","status-publish","format-standard","hentry","category-news","tag-curiosity","tag-gale-crater","tag-jet-propulsion-laboratory","tag-mars","tag-mars-rover","tag-mount-sharp","tag-planetary-science"],"acf":[],"_links":{"self":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts\/14244"}],"collection":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/comments?post=14244"}],"version-history":[{"count":0,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts\/14244\/revisions"}],"wp:attachment":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/media?parent=14244"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/categories?post=14244"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/tags?post=14244"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}