![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2024\/11\/IMG_2583.png\")
<\/p>\nIn addition to SpaceX\u2019s work, Cape Canaveral has been busy with Relativity Space focusing on its reusable Terran R rocket, which is being developed at Space Launch Complex-16. Upgrades to this site, including new infrastructure, were documented during a recent NSF flyover.<\/p>\n
NSF also documented advancements at Amazon\u2019s Kuiper facility, now nearing completion to support broadband satellite launches, as well as progress on NASA\u2019s Mobile Launcher 2 and Blue Origin\u2019s preparations at LC-36. Emerging projects like Space Prep\u2019s processing center further underscore the rapid expansion of Florida\u2019s spaceport infrastructure.<\/p>\n<\/p>\n
Relativity is working on its partially reusable Terran R, after launching the Terran 1 rocket on its sole test flight in March 2023. The Terran 1, which had 90 percent of its mass made up of 3D-printed components, initially succeeded in its first stage flight, but the second stage failed.<\/p>\n
After the Terran 1\u2019s failure, Relativity decided to cancel all further development of Terran 1 and move straight to the Terran R rocket. Terran R consists of a reusable first stage powered by 13 Aeon R engines using methane and liquid oxygen as propellants, along with an expendable second stage using one Aeon Vac engine.<\/p>\n
<\/p>\n
Artist\u2019s impression of the Terran R launching from SLC-16. (Credit: Relativity Space)<\/p>\n
The 82 m tall and nearly 5.5 m wide Terran R is to fly up to 23,500 kg to low-Earth orbit with first stage reuse, or 33,500 kg in fully expendable mode, making it a heavy lift vehicle. Like Terran 1, Terran R will use Space Launch Complex-16 (SLC-16) as its launch site, and NSF conducted a flyover last month which obtained imagery of the complex and other areas of the Kennedy Space Center (KSC) and the Cape Canaveral Space Force Station (CCSFS).<\/p>\n<\/p>\n
New tanks have been seen erected at the tank farm, and NOAA survey imagery showed a foundation being laid down to support a large flame trench that will redirect the thrust from Terran R\u2019s 13 Aeon engines. There is also a drilling rig that is preparing the ground for a large processing hangar to house Terran R at the launch complex.<\/p>\n
NASA mission patches (adsbygoogle = window.adsbygoogle || []).push({});<\/p>\n This hangar is next door to the one that housed the Terran 1. That hangar is still present, and the new hangar is going to be much larger. The Terran R infrastructure is still in its earlier stages and should be in a very different state of construction and readiness by this time next year, as the company envisages a 2026 first flight for Terran R from SLC-16.<\/p>\n Amazon\u2019s new payload processing facility near completion. (Credit: Julia Bergeron for NSF)<\/p>\n During NSF\u2019s flyover, imagery was also obtained of the Amazon Kuiper payload processing facility next to the Shuttle Landing Facility, also now known as the Launch and Landing Facility. The Amazon facility is nearing completion, and the company\u2019s logo is now on the building. In addition, a road at the facility is now paved, and progress has been seen on a storage building at the site.<\/p>\n Amazon is planning to start operational Kuiper launches in 2025, as it works to meet an FCC deadline for placing a large portion of its constellation into orbit. Kuiper is designed to provide low-latency, high-bandwidth broadband service and is a competitor to SpaceX\u2019s Starlink. Amazon must launch 50 percent of its satellites and operate them by no later than July 30, 2026, as per the license it obtained from the FCC.<\/p>\n The Amazon payload processing facility is a key element of the company\u2019s strategy to quickly fly its constellation. The facility will receive shipments of the satellites from the company\u2019s Kirkland, Washington factory before processing them with the help of a 30 m tall high bay clean room that can accommodate Vulcan Centaur and New Glenn fairings. The encapsulated satellite payloads will be moved to the launch site from the processing facility.<\/p>\n The Mobile Launcher 2 \u201cchair\u201d shown during NSF\u2019s flyover. (Credit: Julia Bergeron for NSF)<\/p>\n Mobile Launcher 2 for NASA\u2019s Space Launch System (SLS) rocket, designed to support the Block 1B version of SLS, has also seen progress. The beginnings of the platform\u2019s launch tower are now clearly seen, with seven pieces of the tower\u2019s base \u2014 known as the Mobile Launcher \u201cchair\u201d \u2014 now present. This base will support the first tower module.<\/p>\n Mobile Launcher 2 is to support SLS launches starting with Artemis IV, as Block 1B can support launching not just the Orion spacecraft with its crew but also heavy cargo like elements for NASA\u2019s Gateway in lunar orbit. The mobile launcher may not be ready to support a launch until the spring of 2029, while there are questions about the future viability of SLS being voiced, especially after the recent election results in the United States.<\/p>\n During NSF\u2019s flyover of Cape Canaveral, damage from Hurricane Milton was seen at Blue Origin\u2019s Exploration Park campus. However, the damage was relatively limited and most facilities were relatively unscathed, with the most significant exception being the facility\u2019s storage building that was under construction.<\/p>\n The flattened storage building under construction at Blue Origin\u2019s Exploration Park campus. (Credit: Julia Bergeron for NSF)<\/p>\n The flyover also documented damage to the 2CAT second stage testing building from an earlier mishap, as well as progress on a large parking garage. Imagery was also obtained of the launch pad at Launch Complex-36 (LC-36) as well as other elements of Blue Origin\u2019s facilities at Cape Canaveral.<\/p>\n The flyover was conducted before the rollout of New Glenn\u2019s first stage, So You\u2019re Telling Me There\u2019s A Chance<\/em>, to LC-36 on Oct. 30 in preparation for its first flight. New Glenn\u2019s two stages have now been mated in the complex\u2019s hangar as preparations continue for a static test firing. The full stack rolled out on Nov. 21.<\/p>\n Companies like Stoke Space, Firefly, and ABL Space Systems also have facilities at Cape Canaveral, though they were not covered in the recent flyover. Stoke Space has leased Launch Complex-14, which hosted orbital Project Mercury launches \u2013 including John Glenn\u2019s \u2013 in the early 1960s. Firefly has a lease on Space Launch Complex-20, though it has prioritized operations at Wallops Island in Virginia over operations in Florida.<\/p>\n The LC-14 facility at Cape Canaveral Space Force Station as recently seen by an Earth observation spacecraft. (Credit: Airbus and CNES)<\/p>\n ABL leased Space Launch Complex-15 starting in early 2023, but ABL has now announced a pivot to missile defense systems while discontinuing its commercial launch ambitions. The ABL RS1 only flew once, and that launch failed shortly after liftoff from Kodiak, Alaska, and changes in the market caused ABL to reevaluate its plans. It remains to be seen whether SLC-15 will get another tenant.<\/p>\n There are two additional facilities now planned for the future that will accommodate multiple civil, commercial, and government customers at the Kennedy Space Center (KSC). NASA and All Points Logistics have recently submitted a draft environmental assessment for Space Prep\u2019s upcoming complex at KSC.<\/p>\n Space Prep, a service of All Points Logistics, is developing a complex south of the Vehicle Assembly Building with a spacecraft processing center and a spacecraft logistics center as a commercial space infrastructure-as-a-service offering.<\/p>\n Artist\u2019s impression of the two facilities at the upcoming Space Prep complex. (Credit: All Points Logistics\/Space Prep)<\/p>\n The complex is to begin construction next year and achieve initial operational capability in 2027 and will offer processing services for spacecraft of all sizes, including large ones that need 10 m fairings. While Astrotech already has a payload processing facility just outside KSC that serves the space sector, this development will add much more capacity for spacecraft processing for the growing sector as spaceflight activity continues to ramp up.<\/p>\n<\/p>\n![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2024\/11\/DSC_7370-wmarked-scaled.jpeg\")
<\/p>\n![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2024\/11\/DSC_7334-wmarked-scaled.jpeg\")
<\/p>\n![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2024\/11\/DSC_7473-wmarked.jpeg\")
<\/p>\n![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2024\/11\/cachedImage.jpg\")
<\/p>\n![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2024\/11\/cachedImage.png\")
<\/p>\n