![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2018\/11\/FM-1.Pre-Ship-02.80pct.jpg\")
<\/p>\nThe 404-day clock to connect, checkout, and test the first integrated Orion spacecraft for its flight to the Moon started in early November with the arrival of the European Service Module (ESM) at the Kennedy Space Center (KSC) in Florida. All of the major Orion hardware for Exploration Mission-1 is in the Operations and Checkout (O&C) Building at KSC for the first time, where prime contractor Lockheed Martin will finish assembly.\n<\/p>\n
There is essentially no padding in the year-long schedule, so technicians wasted no time unpacking the ESM and immediately began preparations to mate the U.S.-built Crew Module Adapter (CMA) to the top of the module.<\/p>\n
The schedule calls for completion of assembly and checkout of the first integrated Orion, a series of tests of the new vehicle in Ohio, and final work back at KSC to hand it over to Exploration Ground Systems (EGS) for launch processing.<\/p>\n
ESM assembly complete, flown to KSC<\/p>\n
ESM Flight Model-1 (FM-1) arrived at KSC onboard an Antonov An-124 aircraft inside a transportation container, with the jumbo jet touching down at the Shuttle Landing Facility on November 6.<\/p>\n
Completion of FM-1, the first ESM flight article, is a major milestone in Orion Program development and in the schedule to prepare for its launch on the Exploration Mission-1 (EM-1) test flight, currently forecast for 2020. Assembly, integration, and testing of FM-1 had been a primary or secondary critical path item in the EM-1 schedule.<\/p>\n
<\/p>\n
Images of ESM FM-1 at the Airbus Assembly, Integration, and Testing facility in Bremen, Germany, during pre-shipment activities in early November, 2018. Credit: NASA\/Rad Sinyak.<\/p>\n
\u201cI\u2019m happy to get here, this has been a long time coming,\u201d Exploration Systems Development (ESD) Deputy Associate Administrator Bill Hill said during an event on November 16 celebrating the ESM\u2019s arrival. \u201cWhat was more exciting though was just to see our test team and the smiles on their faces. Because it\u2019s here, they\u2019ve now got a chance to do their critical work.\u201d<\/p>\n
\u201cWith the delivery of this ESA (European Space Agency) Service Module we now finally have the element that allows us to take people farther into space than we\u2019ve ever gone before, so it is a really big event for all of us in the Orion Program,\u201d Mark Kirasich, NASA\u2019s Orion Program Manager, added.<\/p>\n
SpaceX launch tickets (adsbygoogle = window.adsbygoogle || []).push({});<\/p>\n The ESM provides the equipment for propulsion and attitude control, long-duration power, thermal control, and consumables for the spacecraft and eventually multi-person crews on future missions. It forms the core of the overall Orion spacecraft\u2019s Service Module (SM), which includes the CMA and aerodynamic launch fairings that are jettisoned during ascent.<\/p>\n The spacecraft that will fly the EM-1 test flight is the first with working versions of all the modules, minus the provisions for crew. The first Orion test flight, Exploration Flight Test-1 (EFT-1) in late 2014, flew the first working Crew Module (CM) with mass simulators for the Service Module elements.<\/p>\n The shipping container holding the European Service Module (ESM) is moved out of the cargo hold of the Antonov cargo aircraft at the Shuttle Landing Facility at NASA\u2019s Kennedy Space Center in Florida on Nov. 6, 2018. Credit: NASA\/Frank Michaux.<\/p>\n On EFT-1, the spacecraft remained attached to the upper stage of the Delta 4 Heavy launch vehicle until shortly before re-entry, flying a four-hour mission to an intermediate altitude Earth orbit. Orion will fly independently on EM-1 for the first time; following delivery by its Space Launch System (SLS) launch vehicle on a trans-lunar trajectory, the spacecraft will fly into a Distant Retrograde Orbit (DRO) of the Moon and stay there for up to a few weeks before making a mirror image set of burns to return to Earth.<\/p>\n There is a lot of work to do to finish putting the EM-1 Orion spacecraft together and make sure it is functioning correctly. A 404-day schedule of assembly, checkout, and testing started when the ESM arrived in Florida, and the module was immediately taken off the An-124 transport and driven to the O&C building to start work.<\/p>\n \u201cThe plane landed at 11 am and by 4 pm the Service Module was in the building,\u201d Kirasich said. \u201cWhat we\u2019re going to do now and what we\u2019ll keep doing for the next several months is \u2018integrate and test\u2019 and \u2018integrate and test\u2019 to make sure that these vehicles function well together.\u201d<\/p>\n Straight into CMA mate<\/p>\n After removal from the shipping container, the ESM went through a post-shipment functional test to verify everything was still working and then preparations began to attach the CMA to the top of the ESM. The CMA sits between the Crew Module and the ESM and provides the interfaces for command and control instructions from the flight computers in the CM to the ESM and for all of the supplies and data provided by the ESM to the CM.<\/p>\n The ESM and the CMA are the major elements of the overall Service Module (SM) and the first step in that assembly is structural attachment.<\/p>\n The Orion Crew Module and Service Module elements. The Service Module is surrounded and supported by panels jettisoned during launch and a Spacecraft Adapter cone that connects Orion to the launch vehicle. Credit: NASA.<\/p>\n Almost two-hundred bolts will mate the elements and the bolt holes are being lined up after the two elements were set up in a work stand. On the day of the ceremony celebrating the arrival of the ESM, the team was working on finishing alignment and getting ready to start bolting the CMA and the ESM together.<\/p>\n \u201cThe team has been aligning and doing the laser alignment of all those places,\u201d Michael Hawes, Vice President and Orion Program Manager for Lockheed Martin, said. \u201cWe have done a little bit of repositioning, we\u2019re about to the point we\u2019re ready to start inserting those bolts.\u201d<\/p>\n \u201cThere\u2019s a couple of places where we think they\u2019re not quite aligned, but the vast majority of them are so the team intends to go through and start actually doing that physical mate. I describe most of these pieces they\u2019re a little jigsaw puzzle-like and so there\u2019s a little bit of flexibility that we\u2019ll work with but we need to get the primary mate done and that will be getting done within the next couple of days.\u201d<\/p>\n Assembly and checkout of the combined Service Module will run into 2019, making all the connections between the ESM and the CMA and making sure the Service Module systems are all functioning to specification. \u201cOnce we do get the alignment correct, one-hundred and ninety-two bolts will be installed which will complete the structural mate. After that mate is complete, the Service Module will move to the clean room that\u2019s right behind the lift station. In the clean room we will do more than thirty welds and twenty mechanical fitting connections to complete the propulsion and environmental control and life support systems.\u201d<\/p>\n \u201cTo verify the integrity of those welds, we will move the Service Module to a proof pressure cell, where we will pressurize the systems with helium and check for leakage,\u201d she added. \u201cOnce we pass those tests, we will move the Service Module a little further down the aisle in the factory to a multi-function station. Some additional components will be installed, those components are the star trackers, the cameras, and the phased array antennas.\u201d<\/p>\n Image of the CMA-ESM mate from video taken in the O&C Building on November 14, 2018. In the background right is the enclosed clean room where the mated elements will be moved in the next phase of Service Module integration and testing. Credit: NASA\/Rad Sinyak.<\/p>\n \u201cAfter that, we do have a lot of electrical harness connections to do,\u201d she continued. \u201cThat will basically mate the power, command, and data harnesses between the two modules; of those connections, sixty-eight of the mates involve the European Service Module harnesses. We will also then load the coolant systems with their fluids in preparation for functional testing.\u201d<\/p>\n Following functional tests, Marasia noted the Service Module would then go into environmental testing: \u201cWe have a thermal cycle test planned for February and we do have an acoustic test planned for March. Once we successfully pass those tests and have some remaining assembly activities to do, the Service Module will be ready to integrate with the Crew Module in May of 2019.\u201d<\/p>\n EM-1 Crew Module remaining work<\/p>\n On the other side of the clean room from where the Service Module is being mated in the O&C Building at Kennedy, the EM-1 Crew Module is also getting ready for mating with the Service Module next Spring.<\/p>\n \u201cIt\u2019s probably ninety-seven, ninety-eight percent complete,\u201d Kirasich said. \u201cThe component that has not been delivered yet is the hatch, the side hatch. That was a component that initially we weren\u2019t going to fly on EM-1, we were going to put on a bolt-on cover, but a couple of years ago we found a way to fit it into our budget and pull it back from EM-2 to EM-1 so it\u2019s bringing up the rear end in terms of our components.\u201d<\/p>\n \u201cThe second thing is we\u2019re doing our component qualification in parallel with the vehicle build, and in a couple of the qualification tests we found things that we decided that we should fix. For example, in our avionics components there were some inductors that we needed to isolate a little bit better, so we pulled boxes that we had already installed and tested.\u201d<\/p>\n The EM-1 Crew Module in the O&C Building on November 14, 2018. The opening for the side hatch is seen center image. The side hatch is the last major hardware piece remaining to be installed on the module. Credit: NASA\/Rad Sinyak.<\/p>\n \u201cWe pulled them off the vehicle and sent them back to the OEMs (Original Equipment Manufacturers),\u201d he added. \u201cThey\u2019re getting repaired and they\u2019ll be shipped back. We\u2019re scheduled I believe to have all the boxes back I think it\u2019s shortly after the first of the year.\u201d<\/p>\n In contrast to all welded connections between the Service Module elements, the connections from the Crew Module to the Service Module have to be pyrotechnically separated at the end of the mission just prior to re-entry, so they aren\u2019t as invasive. \u201cIt\u2019s much simpler, we have the mechanical bolts, four of them, and then we have the umbilical that has some fluid [connections] and then some electrical harnesses go through the umbilical,\u201d Kirasich noted.<\/p>\n Once the Crew and Service Modules are mated to form a full Orion spacecraft, functional testing will confirm a fully working assembly. \u201cWe\u2019re actually going to do some power-on testing of the Service Module alone, but since everything really originates from the Crew Module, we\u2019ll have Crew Module simulators,\u201d he explained. \u201cSo once we mate the actual Crew Module, we\u2019ll do functional checks of the entire integrated stack.\u201d<\/p>\n The spacecraft will then be prepared for shipping to NASA\u2019s Plum Brook Station in Sandusky, Ohio. The integrated stack will be wrapped up and reoriented for transport on NASA\u2019s Super Guppy aircraft. \u201cWe use something call a \u2018verticator,\u2019 which takes it from the vertical and puts it horizontal and puts it in a plane,\u201d Kirasich noted.<\/p>\n Another image of the EM-1 Crew Module in the O&C Building on November 14, 2018. The heatshield, which was installed in July, can be seen in the lower access level. Credit: NASA\/Rad Sinyak.<\/p>\n At Plum Brook, this first integrated Orion will go through a series of environmental tests. \u201cThe Space Environment Complex there has the world\u2019s largest vacuum chamber, it is about a hundred feet in diameter and a hundred and twenty-two feet high, and that is one of the reasons Orion chose that facility because of its size and its capability,\u201d Sue Motil, NASA ESM Integration Manager at Glenn Research Center, said.<\/p>\n \u201cWe\u2019re going to be conducting these tests probably over a seventy-two day period, I think sixty-seven days for thermal vac (thermal vacuum testing) and then we\u2019ll do another five days on the EMI (Electromagnetic Interference) \/ EMC (Electromagnetic Compatibility).\u201d<\/p>\n Although a part of the testing at Plum Brook, the solar array wings will be removed during transportation; once back at KSC final installation will be completed, along with installation of the launch fairings on the Service Module. Final closeouts of Orion will also be made to turn the spacecraft over to EGS Spacecraft and Offline Operations for EM-1 launch preparations.<\/p>\n EGS will pick up Orion at the O&C Building and take it to first be loaded with propellant and other commodities for flight, and then to be attached to the Launch Abort System tower and structure to complete Orion\u2019s launch configuration. The spacecraft will then be rolled into the Vehicle Assembly Building for stacking on top of SLS to complete the EM-1 vehicle.<\/p>\n EM-2 Crew Module structural outfitting, Delta CDR<\/p>\n A little farther down the O&C building, the crew module for Exploration Mission-2 (EM-2) continues its structural outfitting. The pressure vessel that is the working and living compartment for the crew arrived in Florida at the end of August and is now inside the \u201cbirdcage\u201d tool.<\/p>\n \u201cIt\u2019s going along great,\u201d Kirasich said. \u201cThe first thing it does when we get here we install what we call secondary structure, the things like gussets.\u201d<\/p>\n Just down the aisle in the O&C Building from the EM-1 spacecraft elements, the EM-2 pressure vessel sits in the birdcage structural outfitting tool. Lockheed Martin technicians will be working to turn the structure into the first Orion Crew Module that will fly crew. Credit: NASA\/Rad Sinyak.<\/p>\n \u201cThey are structures that we then attach other things to, so we\u2019re in the process of putting all these gussets, these longerons on. And then once that\u2019s complete, we take the crew module into\u2026a proof pressure cell.\u201d<\/p>\n \u201cWe put the crew module in there and we actually elevate the pressure internally of the crew module to make sure it is not only leak-tight but structurally sound,\u201d he added. \u201cSo that\u2019s next and then we bring it out and then we actually start putting components and welding fluid lines on it.\u201d<\/p>\n The spacecraft to fly on EM-2 will be the first Orion fully-configured to support crewed missions, adding the complement of Environmental Control and Life Support Systems (ECLSS) and crew systems such as displays and controls that will support the requirement of flying a four-person crew for twenty-one days. That evolution in the Orion design is currently going through its Delta Critical Design Review (CDR).<\/p>\n A look inside the EM-2 pressure vessel on November 14, 2018, as it sat in the O&C Building. Once structural outfitting is complete, the pressure vessel will go through a proof-pressure test and then outfitting inside and outside will begin. Credit: NASA\/Rad Sinyak.<\/p>\n \u201cOur board is December 3rd, the pre-board is a week before,\u201d Kirasich said. \u201cI\u2019m seeing the roll-up of the issues next week.\u201d<\/p>\n \u201cThere are something like two-hundred writs submitted, so we\u2019re almost there. Nothing huge, which is what you would expect this time. We had one CDR, this is the Delta.\u201d<\/p>\n","protected":false},"excerpt":{"rendered":" The 404-day clock to connect, checkout, and test the first integrated Orion spacecraft for its flight to the Moon started in early November with the arrival of the European Service Module (ESM) at the Kennedy Space Center (KSC) in Florida. All of the major Orion hardware for Exploration Mission-1 is in the Operations and Checkout […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"footnotes":"","_links_to":"","_links_to_target":""},"categories":[2],"tags":[3718,7766,640],"class_list":["post-38211","post","type-post","status-publish","format-standard","hentry","category-news","tag-em-1","tag-ksc","tag-orion"],"acf":[],"_links":{"self":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts\/38211"}],"collection":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/comments?post=38211"}],"version-history":[{"count":0,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts\/38211\/revisions"}],"wp:attachment":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/media?parent=38211"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/categories?post=38211"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/tags?post=38211"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2018\/11\/45074911894_3dbfdc1a0b_o.25pct.jpg\")
<\/p>\n![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2018\/11\/servicemodule.jpeg\")
<\/p>\n![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2018\/10\/L2-banner@2x.jpg\")
\u201cOur first activity is here in the lift station, we are structurally mating the Crew Module Adapter with the European Service Module,\u201d Amy Marasia, NASA EM-1 Orion Crew Module Assembly Lead, explained during the event.<\/p>\n![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2018\/11\/vlcsnap-2018-11-20-3624-12-03-21h10m21s202.png\")
<\/p>\n![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2018\/11\/vlcsnap-2018-11-20-5773-04-17-10h23m14s663.png\")
<\/p>\n![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2018\/11\/vlcsnap-2018-11-20-6875-12-15-11h29m10s338.png\")
<\/p>\nSee Also<\/h4>\n
\n
![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2018\/11\/vlcsnap-2018-11-20-4943-05-25-05h51m03s649.png\")
<\/p>\n![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2018\/11\/vlcsnap-2018-11-20-0371-12-28-03h51m53s650.png\")
<\/p>\n