{"id":39067,"date":"2016-05-12T19:38:11","date_gmt":"2016-05-12T11:38:11","guid":{"rendered":"https:\/\/wp-productionenv-bjg9h2g2bgg5b8aa.southeastasia-01.azurewebsites.net\/news\/starliners-first-complete-hull-mated-at-kennedy-crew-launch-delayed-to-2018\/"},"modified":"2016-05-12T19:38:11","modified_gmt":"2016-05-12T11:38:11","slug":"starliners-first-complete-hull-mated-at-kennedy-crew-launch-delayed-to-2018","status":"publish","type":"post","link":"https:\/\/starpath.global\/news\/starliners-first-complete-hull-mated-at-kennedy-crew-launch-delayed-to-2018\/","title":{"rendered":"Starliner\u2019s first complete hull mated at Kennedy; crew launch delayed to 2018"},"content":{"rendered":"

Boeing has completed a major milestone in their drive to help NASA regain domestic access to space with the mating of two critical portions of their CST-100 Starliner Structural Test Article to complete the first hull of the commercial vehicle. Meanwhile, Boeing has informed investors that the first crewed launch of Starliner will be delayed at least a full year to 2018 due to development issues.<\/p>\n

Structural Test Article mate \u2013 the first hull for Starliner:<\/b><\/p>\n

Inside former Space Shuttle Orbiter Processing Facility bay 3 at the Kennedy Space Center, now leased by Boeing and known as the Commercial Crew and Cargo Processing Facility (CCCPF), the first CST-100 Starliner hull has been mated together following the combination of the upper and lower domes of the Structural Test Article (STA) on May 2.<\/p>\n

\"2016-05-12-182150\"Completion of the Starliner STA marks the first time a spacecraft has been built inside the former Space Shuttle processing hanger and a milestone not just for Boeing and Starliner but for NASA, too, as the agency looks to continue its transition efforts of the Kennedy Space Center into a multi-user spaceport. <\/p>\n

While identical to what the operational Starliners are expected to be, the STA being built inside CCCPF will not actually fly in space but will instead be used to prove the manufacturing methods and overall ability of the spacecraft to handle the demands of the vehicle that is designed to ferry astronauts to the International Space Station (ISS).<\/p>\n

Once completed, this Starliner STA will be transported from Kennedy to Boeing\u2019s Huntington Beach, California, test facility where it will undergo loads and separation testing that will help inform Boeing of any changes needed to the Starliner design that will actually fly.<\/p>\n

\"\"STAs are no stranger to spaceflight, with the most famous spaceflight STA being the Space Shuttle orbiter Challenger. <\/p>\n

Beginning life as STA-099, the basic airframe and body making of Challenger was first used to verify the Shuttle Orbiter design during the various stressful aspects of flight. <\/p>\n

Spaceflight news subscription<\/path>Rocket building kits<\/path>Space tourism guides<\/path>\n

(adsbygoogle = window.adsbygoogle || []).push({});<\/p>\n

STA-099 showed that the initial Shuttle configuration of OV-101 Enterprise needed several modifications for the actual flight Orbiters \u2013 modifications that were included in the design of the OV-102 Columbia. <\/p>\n

\"2016-05-12-183406\"After completing work as STA-099, NASA determined that it should be converted into a flight-worthy Orbiter \u2013 something that was not initially intended.<\/p>\n

STA-099 was then rechristened OV-099, and the Shuttle Challenger entered service in 1983.<\/p>\n

For Starliner, the building techniques employed by Boeing are significantly different from those of past programs and reflect a desire to ease manufacturing wherever possible.<\/p>\n

\u201cOur team is initiating qualification testing on dozens of components and preparing to assemble flight hardware,\u201d said John Mulholland, vice president and program manager of Boeing\u2019s Commercial Programs. \u201cThese are the first steps in an incredibly exciting, important and challenging year.\u201d <\/p>\n

\"2016-05-12-193752\"One of the primary ways Boeing has rethought the spacecraft manufacturing process relates to the electrical and data cables of the spacecraft. <\/p>\n

According to Boeing, the traditional method of spacecraft manufacturing, where the pressure vessel is built by itself and then outfitted with electrical and data cables, plumbing and other fittings, has been discarded.<\/p>\n

Instead, for Starliner, those elements are built into the top and bottom halves of the spacecraft so that when the two halves are joined, the cables and lines and pipes are already in place, saving engineers the time of having to route those elements through small hatches and assemble parts together inside the closed hull. <\/p>\n

Atlas V pad modifications:<\/b><\/p>\n

As the Starliner STA has undergone processing at the Kennedy Space Center, work has also been steady at the Atlas V launch pad at SLC-41 at the Cape Canaveral Air Force Station nearby. <\/p>\n

The most visible change to the Atlas V pad has been the construction of the crew access tower.<\/p>\n

\"2016-05-12-182308\"With the primary gantry now in place, a great deal of work is taking place at the tower, with crews outfitting elevators, electrical and data cabling, needed crew and worker facilities, and various other elements of the environmental control system that will be needed in the white room of the crew access arm once that is installed later this year.<\/p>\n

Construction of the basic components of the crew access arm and associated environmental control and umbilical lines is also proceeding to schedule at an off-site construction facility near SLC-41. <\/p>\n

This off-site construction facility allows Boeing to assemble the various elements of the crew access tower and the crew access arm on their own schedule while not interrupting United Launch Alliance\u2019s (ULA\u2019s) steady launch rate for the Atlas V.<\/p>\n

Debut of crew launches pushed to 2018:<\/b><\/p>\n

Per the initial funding timelines, and what had been holding true throughout the first part of 2016, it is now understood that Starliner\u2019s first crewed launch will not take place in 2017 as planned. <\/p>\n<\/p>\n

See Also<\/h4>\n
    \n
  • Starliner\/CST-100 Forum<\/li>\n
  • L2 Commercial Crew<\/li>\n
  • Click here to Join L2<\/li>\n<\/ul>\n

    That mission, which would have seen Starliner, affixed to the top of an Atlas V 422 variant rocket, launch from the Cape Canaveral Air Force Station is now penciled in for some time in 2018.<\/p>\n

    Boeing made the announcement of the delay to its investors during a conference call this week.<\/p>\n

    The specific reasons for the delay were not revealed, although it had been understood there are issues being worked that may have contributed to the realigned schedule.<\/p>\n

    \"2016-05-12-182844\"Boeing is continuing to work through their Commercial Crew Program (CCP) obligations, which also allows for NASA reviews on their progress.<\/p>\n

    NASA use a traditionally conservative process when reviewing human space flight requirements, which in turn may require the provider to make improvements on specific elements such as the ascent profile of the Starliner in relation to how it performs while riding with the Atlas V carrier.<\/p>\n

    When asked about such issues, Boeing provided NASASpaceFlight.com with a standard \u2013 albeit non-specific \u2013 response.<\/p>\n

    \u201cCrew safety is our top priority. To the question of technical issues, yes, technical issues come up on a daily basis of all varieties in development programs and we work to solve them and then move on.\u201d<\/p>\n

    Per NASA sources, any issues the Starliner team may be working through are not classed as serious, with no technical \u201cred risks\u201d noted as of earlier this year.<\/p>\n

    (Images: Boeing and L2 \u2013 including Jacques van Oene\/Spacepatches.nl and renders from L2 artist Nathan Koga \u2013 The full gallery of Nathan\u2019s (SpaceX Dragon to MCT, SLS, Commercial Crew and more) L2 images can be *found here*)<\/p>\n

    (To join L2, click here: http:\/\/www.nasaspaceflight.com\/l2\/)<\/p>\n","protected":false},"excerpt":{"rendered":"

    Boeing has completed a major milestone in their drive to help NASA regain domestic access to space with the mating of two critical portions of their CST-100 Starliner Structural Test Article to complete the first hull of the commercial vehicle. Meanwhile, Boeing has informed investors that the first crewed launch of Starliner will be delayed […]<\/p>\n","protected":false},"author":1,"featured_media":30136,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"footnotes":"","_links_to":"","_links_to_target":""},"categories":[2],"tags":[7758,7893,3985,1565,1306],"class_list":["post-39067","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","tag-atlas-v","tag-ccp","tag-cctcap","tag-cst-100","tag-starliner"],"acf":[],"_links":{"self":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts\/39067"}],"collection":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/comments?post=39067"}],"version-history":[{"count":0,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts\/39067\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/media\/30136"}],"wp:attachment":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/media?parent=39067"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/categories?post=39067"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/tags?post=39067"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}