- \n
- STS-132 Live Coverage<\/li>\n
- L2 STS-132 Section<\/li>\n
- Click here to Join L2<\/li>\n<\/ul>\n
Finally, on FD-13 (Wednesday), Atlantis will \u2013 weather permitting \u2013 return to her home at the Kennedy Space Center with a mid-morning landing at the Shuttle Landing Facility.<\/p>\n
However, Atlantis\u2019 crew may have to place Atlantis into a slightly different orientation during certain portions of the post-undock timeline to accommodate the need to maintain thruster L3D\u2019s temperature since that thruster\u2019s heater has failed \u201coff.\u201d<\/p>\n
According to the Mission Evaluation Room (MER), the L3D thruster heater failure is classified as MER-02 \u2013 or the second MER problem recorded during Atlantis\u2019 STS-132\/ULF-4 flight.<\/p>\n
\u201cFollowing initial thruster firings associated with ET Sep, both thruster L3D\u2019s fuel and oxidizer injector temperatures reached 59 and 60 deg F, respectively, at ~135\/20:08 GMT with no sign of thruster heater activation,\u201d notes the MER presentation \u2013 available for download on L2.<\/p>\n
SpaceX launch tickets
<\/path>SpaceX <\/path>Rocket launch schedules <\/path>\n (adsbygoogle = window.adsbygoogle || []).push({});<\/p>\n
![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2010\/05\/A416.jpg\" "\\"A4\\"")
Both the L2D and L4D thrusters \u2013 the adjacent thrusters \u2013 performed nominally with standard heater activation when their injector temperatures reached ~75 deg F.<\/p>\nFor the L3D thruster, a temperature of ~60 deg F was maintained until FD-2 when, during the NC-3 course adjustment burn, the L3D thruster fired twice \u2013 thus raising the thruster temperature to 72 deg F.<\/p>\n
\u201cFrom the observed rate of temperature decline (approx. 1 deg\/hr) the jet temperatures were not predicted to drop low enough to produce thruster leakage or trigger a Fail Leak RM alert overnight; therefore, no vehicle attitude or jet priority changes were performed prior to Crew Sleep,\u201d notes the MER document.<\/p>\n
During the on orbit overnight hours, the L3D thruster temperature dropped to 62 deg F and thermal analysis indicated that the thruster temperature would not drop to \u201cleakage\u201d temperatures. This, coupled with the standard thruster jet firings for rendezvous and docking, brought the thruster temperature to over 100 deg F.<\/p>\n
The thruster temperature is important because, while the thruster valve design is certified for operations as low as 40 deg F, the thruster valves are known to leak at temperatures below 50 deg F.<\/p>\n
\u201cFor a failed off heater, thermal analysis has shown that the valve temperature is ~ 5 deg F warmer than the injector temperature instrumentation,\u201d notes the MER-02 problem report. Because of this finding, an OMRSD requirement was instated (back in the 1980s) to ensure that the thruster valve temperatures are maintained above 50 deg F during ground processing \u2013 a rule carried over into on orbit operations.<\/p>\n
STS-132 Specific Articles: http:\/\/www.nasaspaceflight.com\/tag\/sts-132\/<\/p>\n
Potential L3D Thruster Forward Actions:<\/p>\n
For the thruster on Atlantis, the document notes that the next worst case failure would be a \u2018Fail Leak.\u2019 \u201cSufficient redundancy exists \u2013 two other thrusters on the same side and direction (L2D & L4D) \u2013 such that no special procedures are required.\u201d<\/p>\n
Nonetheless, should a leak occur, the propellant loss or contamination could be staved by closing the L3 manifold isolation valves.<\/p>\n
\u201cPer flight rule C2-2C, the manifold would be closed immediately regardless of the injector temperatures if the jet is suspected to be leaking due to contamination concerns.\u201d<\/p>\n
![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2010\/05\/A317.jpg\" "\\"A3\\"")
Closure of the manifold would result in the loss of the L3L and L3A thrusters as well as the L3D thruster; however, two redundant thrusters would still be available in each of the affected directions.<\/p>\nFailure of the L3D thruster during the docked portion of the mission was negated due to the mated beta angle which prevented the L3D thruster temperature from dropping below approximately 50 deg F.<\/p>\n
However, a greater degree of uncertainty exists in the post-undocking timeframe. \u201cDrain panel heater cycling, which warms L3D injectors about 4F per cycle, is expected in the post undocking -ZLV -XVV attitudes, but the exact duty cycle is hard to predict due to several attitude changes,\u201d notes the MER document.<\/p>\n
Due to these uncertainties, temperatures as low as 40 deg F could be had in the post-undocking timeframe.<\/p>\n
However, \u201cThruster temperature can be maintained with the nominal thermal environment, thruster firings, and attitude changes.\u201d<\/p>\n
![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2010\/05\/A515.jpg\" "\\"A5\\"")
Additionally, non-nominal thruster firings and attitude changes could be employed to maintain thruster temperatures. But, should these thruster firings and attitude controls fail to maintain thruster temperature, the thruster could be declared failed.<\/p>\nIf this were to happen, there would be no serious impact to the remainder of Atlantis\u2019 mission and a Nominal End of Mission (NEOM) would be carried out thanks to the redundancy provided by other thrusters.<\/p>\n
Therefore, since a loss of the L3D thruster would still result in a NEOM, the MER problem report indicates that any off-nominal thruster firing or orbiter attitude change to maintain thruster temperature would likely be declared unnecessary by the Flight Control team.<\/p>\n
This thought of declaring specific action to maintain thruster temperature as unnecessary was confirmed by the MOD (Mission Operations Directorate) and PROP (Propellant) console in Mission Control in a FD-8 presentation by OMS\/RCS \u2013 also available for download on L2.<\/p>\n
![\"\"](\"https:\/\/www.nasaspaceflight.com\/wp-content\/uploads\/2010\/05\/A69.jpg\" "\\"A6\\"")
\u201cRecommendations: Place thruster in last priority after [ISS] flyaround and take no further actions since predictions are that L3D will remain above 47 deg F.\u201d<\/p>\nHowever, \u201cDue to analysis uncertainty, it is prudent to determine alternate attitude(s) that could be used if updated analysis predicts lower temps or if actual behavior varies from predicted\u201d<\/p>\n
However, a change to the nominal post-undock attitudes would mean an increase in potential MMOD (Micro-Meteoroid Orbiting Debris) risk.<\/p>\n
According to the FD-8 OMS\/RCS report, \u201cVehicle attitude changes to place L3D in warmer Environment [would result in] increased MMOD risk.\u201d<\/p>\n
The increased risk would translate to approximately 5%, from 1:379 to 1:361 \u2013 still well within the acceptable risk matrix for the SSP (Space Shuttle Program).<\/p>\n
Furthermore, full data readings on the health of the L3D and other shutdown thrusters would be maintained through EOM (End of Mission) since the thruster\u2019s instrumentation is not affected by the heater failure.<\/p>\n","protected":false},"excerpt":{"rendered":"
Following a spectacularly successful docked mission to the ISS, Atlantis has undocked from the orbiting international science laboratory for the final time in her career. Meanwhile, should mission managers deem necessary, a week\u2019s worth of investigation into the L3D thruster heater failure has produced a potential workaround for the failed \u201coff\u201d heater during post-undock operations. […]<\/p>\n","protected":false},"author":1,"featured_media":29592,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"footnotes":"","_links_to":"","_links_to_target":""},"categories":[2],"tags":[9197,3485],"class_list":["post-40770","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","tag-mmt","tag-sts-132"],"acf":[],"_links":{"self":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts\/40770"}],"collection":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/comments?post=40770"}],"version-history":[{"count":0,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts\/40770\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/media\/29592"}],"wp:attachment":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/media?parent=40770"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/categories?post=40770"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/tags?post=40770"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}