{"id":92292,"date":"2026-11-18T18:19:08","date_gmt":"2026-11-18T10:19:08","guid":{"rendered":"https:\/\/wp-productionenv-bjg9h2g2bgg5b8aa.southeastasia-01.azurewebsites.net\/?p=92292"},"modified":"2026-11-18T18:19:08","modified_gmt":"2026-11-18T10:19:08","slug":"which-parts-of-a-dam-can-insar-reliably-monitor","status":"publish","type":"post","link":"https:\/\/starpath.global\/blog\/which-parts-of-a-dam-can-insar-reliably-monitor\/","title":{"rendered":"Which Parts of a Dam Can InSAR Reliably Monitor?"},"content":{"rendered":"<p>A dam operator may want to track settlement along the crest, movement on an embankment slope, instability near an abutment, and visible deterioration of the concrete. These are different inspection tasks. Satellite InSAR can measure gradual surface displacement where radar observations remain usable over time. It cannot, by itself, determine whether a dam is safe, identify a crack, or diagnose the cause of a movement.<\/p>\n<h2>Start with the inspection target<\/h2>\n<p><strong>Dam crest:<\/strong> InSAR may reveal gradual settlement or another component of displacement along measurable sections. A paved crest is a potential target, but its smooth surface does not guarantee a stable radar measurement.<\/p>\n<p><strong>Dam faces and embankment slopes:<\/strong> Exposed concrete, rockfill, or grass-covered areas may provide measurements under suitable viewing and surface conditions. A steep face can be compressed in a radar image or hidden from one viewing direction. Vegetation and changing surface moisture can also interrupt a displacement series.<\/p>\n<p><strong>Abutments and surrounding slopes:<\/strong> InSAR can help screen for gradual ground movement where enough stable measurement points are available. Movement on an adjacent hillside must be reported separately from movement of the dam structure.<\/p>\n<p><strong>Cracks, spalling, seepage, and internal defects:<\/strong> These require appropriate visual inspections, instruments, and engineering assessment. A displacement point nearby does not establish whether any of these defects is present.<\/p>\n<h2>A real dam shows why coverage changes by viewing direction<\/h2>\n<p><a href=\"https:\/\/www.mdpi.com\/2072-4292\/11\/3\/246\" rel=\"nofollow noopener\" target=\"_blank\">A 2019 study of Gongming Dam No. 4 in China<\/a> examined high-resolution radar observations of an earth-and-rockfill dam with a downstream grass slope, an upstream concrete slope, and a paved crest. The researchers assessed which surfaces retained a usable radar signal before interpreting settlement.<\/p>\n<div style=\"max-width: 800px; margin: 24px auto; padding: 18px 22px; font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', Roboto, Arial, sans-serif; border: 1px solid #3b74bf; border-radius: 8px; background-color: #f8fafc; color: #1a202c; line-height: 1.6;\">\n<div style=\"color: #0b3c85; font-size: 19px; font-weight: bold; margin-bottom: 10px;\">Gongming Dam: where the study obtained usable measurements<\/div>\n<p><strong>Downstream grass slope \u2014 ascending radar observations:<\/strong> The study retrieved a displacement series from this face, particularly across its upper area.<\/p>\n<p><strong>Upstream concrete slope \u2014 descending radar observations:<\/strong> The opposite viewing direction provided a usable series here. Some acquisitions affected by rainfall had poorer coherence.<\/p>\n<p><strong>Smooth paved crest road \u2014 no reliable series from the road surface in these observations:<\/strong> Its weak return and poor phase stability show why a road cannot automatically be treated as a measurement point. Settlement near the top was inferred from usable observations on the adjoining slopes.<\/p>\n<p style=\"margin-bottom: 0;\"><strong>Other faces or dates with poor coherence \u2014 measurement gap:<\/strong> A missing result identifies a limit of the radar observations. It does not establish that the surface did not move.<\/p>\n<\/div>\n<p>The Gongming findings are specific to its surfaces, radar data, viewing directions, and acquisition dates. They are a reason to test both available viewing geometries at a new site, not a rule that one orbit will always measure the downstream face and the other the upstream face. The study also found that rainfall-related changes in surface moisture reduced coherence on some slopes.<\/p>\n<p>A <a href=\"https:\/\/link.springer.com\/article\/10.1007\/s10064-024-03680-3\" rel=\"nofollow noopener\" target=\"_blank\">study comparing Sentinel-1 InSAR with monitoring prisms at a tailings dam<\/a> provides a second coverage check. It obtained comparable displacement trends at selected crest and downstream-slope locations, but measurement points were sparse along parts of the embankment. Wet tailings and ponded water had no usable InSAR points. Results from selected points could not be extended to those gaps.<\/p>\n<h2>What determines whether a point is measurable?<\/h2>\n<p><strong>Radar line of sight:<\/strong> InSAR measures displacement toward or away from the satellite. Movement largely perpendicular to that direction may be poorly detected. A single viewing geometry does not provide the full three-dimensional movement vector.<\/p>\n<p><strong>Surface stability:<\/strong> The radar must receive sufficiently consistent signals across acquisitions. Vegetation growth, wet surfaces, construction activity, snow, and changing water levels can reduce the number of usable points.<\/p>\n<p><strong>Terrain and structure geometry:<\/strong> Steep faces, abutments, and nearby terrain can produce shadow, layover, or foreshortening. Even where a signal exists, a compressed or mixed radar pixel may be difficult to assign confidently to a particular dam component.<\/p>\n<p>These conditions must be checked on the actual dam. An attractive regional displacement map is not evidence that the crest, each face, and both abutments have all been measured.<\/p>\n<h2>A practical assessment before routine monitoring<\/h2>\n<ol>\n<li><strong>Check the image history.<\/strong> Identify suitable radar archives, acquisition dates, viewing directions, resolution, and gaps. Match the available record to the period and rate of movement the operator needs to assess.<\/li>\n<li><strong>Map measurable and unmeasurable areas.<\/strong> Overlay candidate measurement points and coherence results on an accurate dam layout. Label the crest, faces, abutments, and nearby slopes separately; show shadowed and low-coherence areas explicitly.<\/li>\n<li><strong>Review displacement time series.<\/strong> Examine individual points and groups of points for sustained movement, seasonal patterns, noise, and missing dates. State whether each result is a line-of-sight measurement or a movement component estimated using additional assumptions and data.<\/li>\n<li><strong>Cross-check with operations and instruments.<\/strong> Compare observation dates with reservoir level, temperature, rainfall, and maintenance records. Use levelling, GNSS, total-station measurements, or other site instruments at relevant locations. Compare like-for-like movement components and time periods, then inspect unexplained anomalies on site.<\/li>\n<\/ol>\n<p>The deliverable should be a map of where InSAR is dependable, displacement histories for those locations, a clear record of gaps, and a list of findings requiring ground follow-up. \u201cNo displacement detected\u201d is meaningful only for a surface and movement direction that the system could observe with adequate quality; it is never a stand-alone dam safety conclusion.<\/p>\n<p>For broader background, see STARPATH GLOBAL\u2019s <a href=\"https:\/\/starpath.global\/blog\/insar-monitoring-for-infrastructure-ground-subsidence-and-geohazard-assessment\/\">InSAR infrastructure guide<\/a>. To assess a specific asset, explore our <a href=\"https:\/\/starpath.global\/solutions\/water\">water monitoring solution<\/a> or <a href=\"https:\/\/starpath.global\/contact\">contact our team<\/a> for a site-specific observability review.<\/p>\n<p><em>Feature image: Satellite-derived deformation measurements at the West Dam of Diamond Valley Lake, California, based on Envisat data from 2004 to 2009. Credit: Hansje Brinker BV \/ ESA.<\/em><\/p>\n","protected":false},"excerpt":{"rendered":"<p>A dam operator may want to track settlement along the crest, movement on an embankment slope, instability near an abutment, and visible deterioration of the concrete. These are different inspection tasks. Satellite InSAR can measure gradual surface displacement where radar observations remain usable over time. It cannot, by itself, determine whether a dam is safe, [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":92293,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"footnotes":"","_links_to":"","_links_to_target":""},"categories":[3,10732],"tags":[10919,44,10834,163,157,3614,10920,10339],"class_list":["post-92292","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","category-water","tag-dams","tag-gnss","tag-ground-deformation","tag-insar","tag-sar","tag-sentinel-1","tag-tailings-dams","tag-water-infrastructure"],"acf":[],"_links":{"self":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts\/92292"}],"collection":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/comments?post=92292"}],"version-history":[{"count":2,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts\/92292\/revisions"}],"predecessor-version":[{"id":92295,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/posts\/92292\/revisions\/92295"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/media\/92293"}],"wp:attachment":[{"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/media?parent=92292"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/categories?post=92292"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/starpath.global\/blog\/wp-json\/wp\/v2\/tags?post=92292"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}